1. <dd id="zt42m"><track id="zt42m"></track></dd>

    2. <button id="zt42m"><object id="zt42m"></object></button>
      <tbody id="zt42m"><track id="zt42m"></track></tbody>
    3. 產品中心

      當前位置: 主頁 > 產品中心 > Ball valve

      產品詳情
      • Trunnion-mounted ball valve

      Trunnion-mounted ball valve

      產品說明

      /instructions

      Trunnion-mounted Ball Valves

      Size 2" to 56" (50 mm to 1400 mm)

      ASME Class Class 150 to 2500

      Design Standard API 6D

      Beyond Standards:

      Trunnion-mounted Ball Valve design complies to API 6D

      Valves offered with API 6D monogram

      Wide portfolio of Side-entry and Top-entry designs

      Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

      Stem seal configurations tested to API 622 at Yarmouth Research labs, Maine, USA

      Firesafe design - Tested to API 607 and API 6FA

      CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H

      PED Module B1 Design examination certificate (certified by DNV) available

      Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment

      SIL3 - Safety Integrity Level SIL 3 certification to IEC 61508, certified by Exida/ TUV

      Valves successfully tested to Shell Design Evaluation Test, Procedure 77/300 for temperature -29 to 150 degree C (O rings) and -50 to 150 degree C (Lip seals)

      Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required

      Features that Add Value:

      Double block and bleed (DBB) feature - Valves are designed and tested for automatic cavity relief

      Anti-blowout stem design

      Coil springs used for consistent seat loading and lower operating torque

      Lip seals provided for low temperature services

      2/3 stage Stem and 2 stage Body Joint sealing system; Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

      Where tight shut off is required, Double piston effect (DPE) seats provided for redundancy in sealing

      Versatile Solutions:

      Wide portfolio of Side-entry and Top-entry designs

      Options: Buried service, Cryogenic

      Offered with Electric, Pneumatic and Hydraulic Actuators

      In-house Tests Capabilities - Cryogenic Test, Pipe Bending Test, Vacuum Test and Fast Closure Test

      ValvTrac? RFID tagging offered for reliable digital traceability

      Trunnion-mounted Ball Valves - Top-entry Design

      Special Features:

      Accessibility to all the valve internals from the top

      In-line valve maintenance, without disassembling the valve from the pipeline

      Reduces maintenance downtime

      Body cover joint not exposed to pipeline stresses


      熱門推薦:
      精品乱码一卡二卡三卡|日本工番口番全彩无彩翼漫画|日本成熟老妇人XXXX|999国内精品永久免费视频